eason:
The screw plug of the oil nozzle is not tightened. Even if the screw is tightened, there will
be some oil in the screw, and the caliper will emerge slowly for a long time when the
service temperature rises.
Solution 1: tighten the oil nozzle plug screw with a special oil nozzle wrench to ensure that
it cannot be screwed. The recommended torque value is 20nm
Solution 2: after installing the brake caliper, clean the residual brake fluid inside the screw
with an air gun
© 2023-2025 SAVANINI. ALL RIGHTS RESERVED 浙ICP备12023179号