Savanini calipers are made of high-quality aluminum alloy materials, which have the characteristics of light weight and high rigidity. The pedal feeling is improved, and the pedal can realize the delicate foot feeling. In addition, the size of the two-piece calipers becomes smaller and the gap between them is minimized. This is savanini continues to adhere to its full range of caliper products using forging process CNC processing production. S series calipers are designed with built-in dust ring, which can be used not only in the street but also in the extreme environment with high load. The surface of the calipers is coated with anodized coating, which is helpful to improve the cooling performance of the calipers.
Forged calipers are anodized in custom colors (if fading is considered, we recommend using anodized oxygen (competitive grey) or (silver plating) colors to resist acid and alkali corrosion and UV light, and can keep the surface color to avoid fading).
Model: S800
Forged Aluminum Alloy Split Scenario Street & Track Stainless Steel Fuel Line Ventilated Cooling Design Recessed Dust Rings
Caliper Technical Spec:
Weight: 4601g/pc
Piston area: 64.24 cm²
Piston diameter: 32mm*8
Corresponding brake disk diameter: φ400mm-φ380mm-φ355mm
Corresponding brake disk thickness: Max 34mm-Min 32mm
Caliper size：D155.7mm*H93.81mm*W337.786mm
Corresponding wheel: (18 inch and above wheel) (19 inch and above wheel) (20 inch and above wheel)
Oil inlet hole thread specification: M10*1
Caliper mounting center hole distance: 220mm
Mounting hole offset: 42mm
Mounting hole diameter: 12.25mm
Distance from mounting surface to top of brake disk: 56.45mm
Brake disc specification:
Friction surface width: (φ355mm*32-54.5mm) (φ380mm*334-54.5mm) (φ400mm*34-54.5mm)
Brake disk duct:
(φ355mm*32 72 cooling dumping arc slots 7 scribing arcs PCD-233mm)
(φ380mm*34 84 heat dissipation arc slots 8 arcs PCD-258mm)
(φ400mm*34 84 heat dissipation arc grooves 8 arcs PCD-278mm)
Heat treatment: temperature 580 ℃ high temperature 120 ℃ low temperature repeatedly rise and fall temperature 72 hours heat treatment
Mounting hole diameter: φ8.1mm
Positioning ring diameter:
(355*32φ209mm petal step: 2.5mm)
(380*34φ238mm petal step: 1.5mm)
(400*34φ258mm petal step: 1.5mm)
Brake disc surface treatment: iron phosphating brake surface grinding flower
Brake disk ***utive standard: GG20HC
Brake pad specification:
Brake pad model: S800
Thickness of brake pad: 18mm
Friction surface width: 49.5mm
Friction block area: 35.3cm/pads²*4 pads/per caliper
Brake Pad Formula: Street F550 (standard) / Street cum Track S700 (optional) / Track R800 (optional)
Caliper Technical Inspection Specifications:
Caliper forging shell strength: tensile strength Qb ≥ 320MPa
Shell hardness: hardness HV ≥ 400
Low-pressure sealing test: caliper through the air pressure 0.4MPa, stabilized pressure 5s, pressure drop is not more than 100Pa
High-pressure sealing test: caliper through the air pressure 12MPa, stabilized pressure 5s, pressure drop is not greater than 0.2MPa
Appearance: anodized appearance without bump damage, color gloss consistency
Ultra-high-pressure test: sampling calipers through 30MPa oil pressure, no failure cracking
Testing standard: other performance of brake caliper assembly is in line with the provisions of QC/T592 {Car brake caliper assembly performance test requirements and bench test methods}.
Translated with DeepL.com (free version)
© 2023-2025 SAVANINI. ALL RIGHTS RESERVED 浙ICP备12023179号