There is air in the brake oil circuit, which needs secondary exhaust. It is best to use the vacuum brake oil exhauster. The downward pressure brake uses the special equipment of...
The brake pads are too tight and need to be run in The axle code grinds the brake disc, and one side of the brake pad is inward, causing the brake pad not to be centered. First check ...
According to the J value and ET of the wheel hub, we can calculate whether the caliper can avoid the wheel hub or not. You can find the caliper wheel hub data calculation in the official website d...
Reason: the oxide film is not resistant to strong alkaline cleaning solution, so neutral cleaning solution can be used Solution 1: avoid washing the car with strong alkaline clea...
Cause: the metal content of the brake pad is uneven, and the competitive leather causes the brake disc to wear too fast Solution 1: replace the S500 series of street brake pads
The proportion of metal in the brake skin is high, and the abnormal sound during the brake skin opening stage is a normal phenomenon, so the disc can be run in gently Whether there is...
eason: The screw plug of the oil nozzle is not tightened. Even if the screw is tightened, there will be some oil in the screw, and the caliper will emerge slowly for a long time when...
